欢迎您浏览济南巨野河福华建材厂,主营:济南腻子粉,济南石膏粉,济南抹面砂浆等建筑装饰材料,大量批发,欢迎咨询。

专注绿色建筑装饰材料

经营管理理念:让客户用的放心!

24小时服务热线:

13864111871

当前位置: 首页 - 新闻动态 > 行业资讯
行业资讯
联系我们

济南福华建材厂

联系人:吴老师 

电话:13864111871 

手机:13864111871
          0531-81901300
地址:山东省济南市高新开发区巨野河办事处山圈村西


普通腻子和耐水型腻子的区别!

来源:https://www.jnfhjc.com 日期:2019-01-07 发布人:

内墙耐水腻子是用来墙面修补找平的一种基材,为下一步装饰(刷油漆贴壁纸)打下良好的基础,一般普通型腻子为Y型,耐水型腻子为N型。

  Inside wall waterproof putty is a kind of base material used for wall repair and leveling, which lays a good foundation for the next decoration (painting and wallpaper). General type putty is Y type, water-proof type putty is N type.
  耐水腻子比普通腻子手感好:耐水腻子施工后表面光滑细腻,收光处理后的腻子会给人滑腻的手感, 具备装饰效果可作为装饰层。防水腻子特有的白度和致密度,使其单位面积涂料附着力、遮盖率比使用普通腻子的墙体可节省25~30%的涂料用量。此外,耐水腻子粉要求产品刮涂后浸泡在水中48小时仍然无起皮、开裂、起鼓现象发生,并且能达到0.30Mpa以上的粘结强度。与普通型腻子相比较,
  Water-resistant putty is better than ordinary putty in handle: the surface of water-resistant putty is smooth and delicate after construction, and the putty after lighting treatment will give people a slippery feel, which has decorative effect and can be used as decorative layer. The whiteness and density of waterproof putty can save 25-30% of the amount of coatings used in the wall of waterproof putty compared with that of ordinary putty. In addition, the water-resistant putty powder requires that the product should be soaked in water for 48 hours after scraping, without peeling, cracking and bulging, and the bonding strength can reach above 0.30 Mpa. Compared with ordinary putty,
济南腻子粉
  绿舟内墙耐水腻子粉
  Water-resistant putty powder for inner wall of green boat
  耐水型腻子生产的质量要求更高,则普通型的成本。售价就相对来说要比耐水腻子低一些。然而,因为产品结实、胶性大,搅拌和批刮困难,强度子高,耐水腻子比普通腻子打磨起来更费力。在上墙未干透前有碱性,会产生一定碱性的氢氧化钙,一般要持续5-7天才会消失,这种碱性如果控制不好,会令施工者有灼烧的感觉,同时还可能使面层乳胶漆的色浆分解,导致颜色不均的情况出现。
  The quality requirement of water-resistant putty production is higher, and the cost of common type is higher. The price is relatively lower than that of water-resistant putty. However, because the product is strong and gummy, it is difficult to mix and scrape batches, and has high strength, water-resistant putty is more difficult to polish than ordinary putty. Alkaline before the wall is dry, will produce a certain amount of alkaline calcium hydroxide, generally will last 5-7 days to disappear, if this alkalinity is not well controlled, it will make the builder have a burning feeling, but also may make the paste decomposition of the surface latex paint, resulting in uneven color situation.
  以上内容由济南腻子粉整理发布,更多相关资讯可以点击我们的官网进项咨询:https://www.jnfhjc.com/
  The above content is organized and released by Jinan putty powder. For more information, please click on our official website to consult: https://www.jnfhjc.com/