欢迎您浏览济南巨野河福华建材厂,主营:济南腻子粉,济南石膏粉,济南抹面砂浆等建筑装饰材料,大量批发,欢迎咨询。

专注绿色建筑装饰材料

经营管理理念:让客户用的放心!

24小时服务热线:

13864111871

当前位置: 首页 - 新闻动态 > 公司新闻
公司新闻
联系我们

济南福华建材厂

联系人:吴老师 

电话:13864111871 

手机:13864111871
          0531-81901300
地址:山东省济南市高新开发区巨野河办事处山圈村西


腻子粉分层剥落的原因!

来源:https://www.jnfhjc.com 日期:2019-06-25 发布人:

  腻子在建筑墙面装饰中起着至关重要的作用,随着人们生活质量和审美水平的提高,不仅对室内装饰质量有要求,对美观程度也十分重视。优质美观的墙面不仅需要优秀的技术工人,还需要高品质的腻子粉来做保证。

  Putty plays an important role in building wall decoration. With the improvement of people's quality of life and aesthetic level, it not only requires the quality of interior decoration, but also attaches great importance to the aesthetic level. High-quality and beautiful walls need not only excellent skilled workers, but also high-quality putty powder to ensure.
  房子是人们要住一辈子的地方,一定要经过好质量,因此装修房子,大家好选择好腻子。如果你选择劣质砂浆,会有很多问题。例如,在腻子的施工过程中,人们会看到腻子剥落,例如在两个腻子层之间,腻子层与基层之间。这是怎么发生的?
  The house is where people want to live for a lifetime. It must pass through good quality. Therefore, when decorating the house, we'd better choose putty. If you choose inferior mortar, there will be many problems. For example, in putty construction process, people will see putty peeling, for example, between two putty layers, between putty layer and base layer. How did this happen?
  在两层腻子之间剥落
  Peeling between two layers of putty
  原因1。在腻子完全干燥之前,开始建造两个腻子。2、层路腻子污染(灰尘、油污等)。3.腻子不匹配,即层腻子的强度低于第二层腻子的强度。4. 使用劣质腻子。
  Reason 1. Before putty dries completely, start building two putties. 2. The first layer of road putty pollution (dust, oil pollution, etc.). 3. Putty does not match, that is, the strength of the first layer of putty is lower than that of the second layer. 4. Use inferior putty.
  解决方案1、将剥去的腻子层彻底铲除。2. 清洗浮尘后,采用优质的墙体水泥进行涂装和密封。3.墙体坚实干燥后,选用优质腻子进行修补施工。4. 正确选择和匹配腻子。
济南腻子粉
  Solution 1. Remove the putty layer completely. 2. After cleaning the floating dust, high-quality wall cement is used for painting and sealing. 3. After the wall is solid and dry, high-quality putty is selected for repairing construction. 4. Choose and match putty correctly.
  原因1、草根松动,出现跑沙的情况。底座太光滑了。3、底座有污染(灰尘、油脂、脱模剂等)。4、长期浸泡底座。底子上有一层光亮的水在刮腻子。6. 使用劣质腻子。
  Reasons 1. Grass roots loosen and sand runoff occurs. The base is too smooth. 3. The base is polluted (dust, grease, demoulding agent, etc.). 4. Long-term immersion in the base. There is a layer of bright water scraping putty on the bottom. 6. Use inferior putty.
  解决方案
  Solution
  1. 刮除剥离腻子层,选用优质腻子刮。2. 对于严重粉末状的施工表面,采用优质的墙体水泥进行涂装和密封;墙面固定干燥后,腻子层即可修复。3、浸泡墙面,消除阳光晒干,施工前必须涂抹防水涂料进行腻子层修补。4、腻子的正确选择和搭配,腻子的强度不匹配,即种方式的腻子强度低于第二种方式的腻子强度。
  1. Scrape and peel off putty layer and select high-quality putty to scrape. 2. For the severely powdered construction surface, high-quality wall cement is used for painting and sealing; after the wall is fixed and dried, putty layer can be repaired. 3. Immerse the wall, eliminate sunshine drying, and apply waterproof paint to repair putty layer before construction. 4. Proper selection and collocation of putty, putty strength does not match, that is, putty strength of the first way is lower than that of the second way.