Nowadays, there are many buildings in the city in summer. There is a feeling of "trying to compete with the heavenly Father". In fact, the construction of these buildings can not be separated from the use of external wall thermal insulation mortar. The external wall thermal insulation mortar can not only maintain the inner layer materials, making the construction more solid and solid, but also make the construction surface smooth and smooth with waterproof function.

　　下面济南抹面砂浆公司带我们理解下外墙保温砂浆的施工操作流程：

　　Jinan plastering mortar Co., Ltd. takes us to understand the construction process of exterior wall thermal insulation mortar:

　　1.外墙保温砂浆运用前要先与水搅拌1：2份额，搅拌后当即运用。

　　1. The external wall thermal insulation mortar shall be mixed with water for 1:2 before application, and shall be applied immediately after mixing.

　　2.为了保证施工前表面洁净平整、无油渍，一些沉浮、断裂、松动、风化的局部也要提早根除。

　　2. In order to ensure that the surface is clean, flat and free of oil stains before construction, some floating, broken, loose and weathered parts should also be eradicated in advance.

　　3.对混凝土墙体和砌块墙体施工时应涂满砂浆胶粉。在涂改层时厚度不能大于10mm，今后每层厚度不能大于20mm，两次施工时辰应该距离24小时以上。

　　3. The concrete wall and block wall shall be coated with mortar powder during construction. When the first layer is altered, the thickness shall not be greater than 10 mm. In the future, the thickness of each layer shall not be greater than 20 mm. The two construction hours shall be more than 24 hours away.

　　4.在抗裂层中用金属网替代网格布作为加强骨架，使其衔接结实。等保温层单调今后才干够停止抗裂保温施工。

　　4. In the anti crack layer, the metal mesh is used instead of the mesh cloth as the reinforcing framework to make it connected firmly. Only when the insulation layer is monotonous can the anti crack insulation construction be stopped in the future.

　　5.在保温层、维护层单调前首要做到避免水冲、碰击、和震动。两者的施工应该依照国度规范规划，施工厚度不允许有负误差。

　　5. Before the insulation layer and maintenance layer are monotonous, avoid water flushing, bumping and vibration. The construction of the two should be in accordance with the national standard planning, the construction thickness is not allowed to have negative error.

　　别的还要留意的是，外墙保温砂浆消费时要操控砂的含水率，由于假如砂的含水率过高，砂特别简单粘结成团，砂粒也更易赌赛筛网，更终会招致筛分效率降低。所以，这一切只要准备好了才干顺利完成砂浆施工。

　　In addition, it should be noted that the water content of the sand should be controlled when the external wall thermal insulation mortar is consumed, because if the water content of the sand is too high, the sand is particularly simple to bond into a group, and the sand particles are more likely to bet on the screen, which will eventually lead to the reduction of screening efficiency. Therefore, as long as all these are ready, the mortar construction can be completed smoothly.

　　以上是济南抹面砂浆厂家为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：https://www.jnfhjc.com

　　The above is the relevant content introduced by Jinan plastering mortar manufacturer. For more information, please visit the website: https://www.jnfhjc.com