欢迎您浏览济南巨野河福华建材厂,主营:济南腻子粉,济南石膏粉,济南抹面砂浆等建筑装饰材料,大量批发,欢迎咨询。

专注绿色建筑装饰材料

经营管理理念:让客户用的放心!

24小时服务热线:

13864111871

当前位置: 首页 - 新闻动态 > 公司新闻
公司新闻
联系我们

济南福华建材厂

联系人:吴老师 

电话:13864111871 

手机:13864111871
          0531-81901300
地址:山东省济南市高新开发区巨野河办事处山圈村西


济南抹面砂浆搅拌困难的原因是什么?

来源:https://www.jnfhjc.com 日期:2019-12-10 发布人:

  在建筑工地的建设中,我们通常会使用迫击炮,所以我们经常会因为一些施工要求,天气和其他客观条件的原因,工人通常会使用便携式电动砖混合使用,在使用过程中往往会遇到各种各样的问题。造成济南抹面砂浆搅拌困难的原因一般有:

  In the construction of construction site, we usually use mortars, so we often because of some construction requirements, weather and other objective conditions, workers usually use portable electric bricks mixed use, in the use process often encounter a variety of problems. The reasons for the difficulty in mixing Jinan plastering mortar are as follows:
  首先,的力量使用的便携式电动砖工人缺乏,需要更换混合器与一个较小的直径,需要钢筋的直径也有一个小的直径,所使用的电力机不小于700 w,使用低速混合机混合。
济南抹面砂浆
  First of all, the strength of the use of portable electric brick workers is lack, need to replace the mixer with a smaller diameter, need to have a smaller diameter of the diameter of the steel bar, the electric machine used is not less than 700 W, use low-speed mixer to mix.
  二、在搅拌砂浆的时候,工人加的水少,按照施工说明是按照加水量的,如果水太少,水灰比很低,那么就会有搅拌的问题。
  2. When mixing mortar, workers add less water. According to the construction instructions, the amount of water is added. If the water is too little and the water cement ratio is very low, there will be mixing problems.
  3、包装袋使用纸塑料复合一分之三包装方法进行包装,内袋包装袋子很容易被转移到搅拌器打开和使用时,内袋将伤口上面的搅拌机搅拌棒,所以混合收到阻力,增加混合的困难。
  3. The packaging bag is packaged by three thirds of the paper plastic composite packaging method. The inner bag packaging bag is easy to be transferred to the mixer when the mixer is opened and used. The inner bag will stir the mixer bar above the wound, so the mixing resistance is received, which increases the difficulty of mixing.
  所以,当水消费需求规范,按照制造商的证书上面的水补充填写目标,应该使用根据称量每个包的规范的砂浆用于注水,相应的在容器中的位置校准记录,要求规范混合比例,注意纹理调查浆后,确保质量的混合。如果加水后,觉得水太多,不允许用部分粉末材料倒水,否则会影响数据的功能,需要在继续混合后再增加粉末材料。
  Therefore, when the water consumption requirements are standardized and the water replenishment target is filled in according to the manufacturer's certificate, the mortar according to the specifications of each package shall be used for water injection, and the corresponding position in the container shall be calibrated to record, and the mixing proportion shall be standardized. Pay attention to the texture investigation slurry to ensure the quality of mixing. If there is too much water after adding water, it is not allowed to pour water with some powder materials, otherwise the function of the data will be affected, and the powder materials need to be added after further mixing.
  以上是济南抹面砂浆小编为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:https://www.jnfhjc.comThe above is the introduction of Jinan plastering mortar. To learn more, please visit https://www.jnfhjc.com