欢迎您浏览巨野河福华建材厂,主营:济南腻子粉,济南石膏粉,济南抹面砂浆等建筑装饰材料,大量批发,欢迎咨询。

专注绿色建筑装饰材料

经营管理理念:“优质产品,优质服务”

24小时服务热线:

13864111871

当前位置: 首页 - 新闻动态 > 公司新闻 >
公司新闻
联系我们

高新开发区巨野河福华建材厂

联系人:吴老师 

电话:13864111871 

手机:13864111871
          0531-81901300
地址:山东省济南市高新开发区巨野河办事处山圈村西


济南抹面砂浆在使用前应如何配料

来源:https://www.jnfhjc.com 日期:2020-03-04 发布人:admin

  济南抹面砂浆是由混凝土、石英砂、高分子细砂等多种防腐剂与机械设备混合而成的对称型胶粘剂,适用于粘接保温板胶粘剂,又称高分子胶凝砂浆。在当代建筑工程建设项目导入绑定砂浆,能拥有出色的灵活性和凝聚力,和它的水溶性好,耐磨性及其方便的可操作性,提高了板和保温隔热板中间的胶的抗压强度,提高抗拉强度,处理接字层下降之间的墙面空鼓,如产品质量问题。

  Jinan plastering mortar is a kind of symmetrical adhesive which is composed of concrete, quartz sand, polymer fine sand and other preservatives mixed with mechanical equipment. It is suitable for bonding insulation board adhesive, also known as polymer cemented mortar. The introduction of binding mortar in contemporary construction projects can have excellent flexibility and cohesion, and its good water solubility, wear resistance and convenient operability, improve the compressive strength of the glue between the board and the heat insulation board, improve the tensile strength, and deal with the hollowing of the wall between the drop of the joint layer, such as product quality problems.
济南抹面砂浆
  为了保证工程施工胶黏剂的实际效果,防止保温板出现不充分掉落的现象,同时也减少木材奢侈浪费,在前期准备胶黏砂浆时要特别注意以下几种制备方法:
  In order to ensure the actual effect of the construction adhesive, prevent the insufficient falling of the insulation board, and reduce the luxury and waste of wood, the following preparation methods should be paid special attention to when preparing the adhesive mortar in the early stage:
  抹面砂浆的本质是挤塑聚苯板安装,在整个生产过程中相关施工队伍发展的粘结砂浆应严格执行实施相对原料选择和准备,比例可能按照水泥灰浆和水的比例为4比1。
  The essence of plastering mortar is the installation of extruded polystyrene board. During the whole production process, the bonding mortar developed by the relevant construction team should strictly implement the selection and preparation of relative raw materials. The proportion may be 4:1 according to the proportion of cement mortar and water.
  根据水泥砂浆的实际要求,对原材料进行严格的计量,并注意整个搅拌过程的对称性。次混合胶后,还需要每隔12分钟进行一次再混合的工作。另外,成功后的胶粘剂应注意其贮存,避免水分蒸发过快,需要注意搅拌均匀,搅拌材料应在2小时内用完。
  According to the actual requirements of cement mortar, the raw materials shall be measured strictly, and the symmetry of the whole mixing process shall be noted. After the first mixing, it is necessary to mix again every 12 minutes. In addition, the successful adhesive should pay attention to its storage to avoid too fast evaporation of water, and attention should be paid to even mixing, and the mixing materials should be used up within 2 hours.
  以上是济南抹面砂浆厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:https://www.jnfhjc.comThe above is the relevant content introduced by Jinan plastering mortar manufacturer. To learn more, please visit the website: https://www.jnfhjc.com