公司新闻
联系我们
济南福华建材厂
联系人:吴老师
电话:13864111871
手机:13864111871
0531-81901300
地址:山东省济南市高新开发区巨野河办事处山圈村西
石膏粉的运用不好或者施工不当的后果
来源:https://www.jnfhjc.com 日期:2023-04-14 发布人:
说到石膏粉很多人基本看到的是石膏粉的工艺品,而正在的石膏粉并不是经常见到,我们基本在城市里天天的看到的石膏粉制品雕塑就是石膏粉制作而成,如果石膏粉的运用不好或者施工不当,可能会出现以下后果:
When it comes to gypsum powder, many people basically see handicrafts made of gypsum powder, but the current gypsum powder is not commonly seen. The gypsum powder sculptures we see every day in cities are made of gypsum powder. If the application of gypsum powder is not good or the construction is improper, the following consequences may occur:
施工工艺不正确,导致济南石膏粉的密度不均匀,容易出现裂缝。
The incorrect construction process leads to uneven density of Jinan gypsum powder and easy occurrence of cracks.
石膏粉中的含水量不均匀,会导致石膏粉的强度不同,造成表面不平整、开裂等问题。
The uneven moisture content in gypsum powder can lead to different strength of gypsum powder, resulting in surface unevenness, cracking, and other problems.
在使用过程中石膏粉常常会收缩,如果没有合理的控制,就会导致表面收缩的现象,影响外观效果。
Gypsum powder often shrinks during use, and if not properly controlled, it can lead to surface shrinkage and affect the appearance effect.
如果在石膏粉的配比和施工工艺上有所偏差,就可能出现石膏粉表面发芝,影响表面光泽度。
If there is a deviation in the proportion and construction process of gypsum powder, it may cause surface rust on the gypsum powder, affecting the surface glossiness.
石膏粉的施工时机、温度、湿度等影响因素都需要谨慎控制,否则就会影响施工效果和使用寿命。
The construction timing, temperature, humidity and other influencing factors of gypsum powder need to be carefully controlled, otherwise it will affect the construction effect and service life.
总之,如果石膏粉的运用不好,会影响到施工效果,也可能会影响到其使用寿命,因此在使用石膏粉时需要严格按照要求进行配比和施工,以确保施工效果和使用寿命。欢迎您随时来我们网站https://www.jnfhjc.com咨询!
In short, if the use of gypsum powder is not good, it will affect the construction effect and may also affect its service life. Therefore, when using gypsum powder, it is necessary to strictly follow the requirements for proportioning and construction to ensure the construction effect and service life. Welcome to our website anytime https://www.jnfhjc.com consulting service