一、甲醛超标的建议小心点

1、 Be careful when dealing with formaldehyde exceeding the standard

有些腻子粉为了效果好掺入胶水，甲醛超标环保性能不强。所以购买腻子粉先要保持腻子粉的安全性能。腻子粉普遍用于家庭装修，因为施工简单方便，所以被很多业主推崇。质量好的腻子粉经过严格质量检测，外包装有国家认证标识，业主不要为了贪小便宜选择劣质腻子粉。接下来小卓带大家了解一下腻子粉如何选购。

Some putty powders are mixed with glue for better results, but their formaldehyde exceeds the standard and their environmental performance is not strong. So when purchasing putty powder, it is necessary to maintain the safety performance of the putty powder first. Putty powder is commonly used for home decoration, and is highly praised by many homeowners due to its simple and convenient construction. High quality putty powder undergoes strict quality testing, and the outer packaging has a national certification mark. Owners should not choose inferior putty powder for the sake of small gains. Next, Xiaozhuo will take you to learn how to choose putty powder.

二、产品有儿童安全级需要仔细选择哟

2、 The product has a child safety level and needs to be carefully selected

1.在选腻子粉的时候先看包装，需要注意的是腻子粉的生产标准、生产日期是否存在，选择标注建材产品儿童安全级的腻子。

When selecting putty powder, first check the packaging, pay attention to whether the production standards and production dates of the putty powder exist, and choose putty labeled with the child safety level of building materials products.

2.从腻子硬度、白度、细度、和易性、施工性能等方面考虑，用肉眼一般很难分辨其好坏。好的腻子粘结强度超国标2倍、粉质细腻，反之，发散、有针孔的腻子质量差，用灰刀铲一些和好腻子，很快就掉下来的，说明该腻子粘性差，千万不要选。不然后期墙面开裂、脱落、粉化，烦恼不断!

2. Considering the hardness, whiteness, fineness, workability, and construction performance of putty, it is generally difficult to distinguish its quality with the naked eye. Good putty has a bonding strength twice that of the national standard and a fine powder texture. On the contrary, putty with divergence and pinholes has poor quality. If some good putty falls off quickly after being scraped with a mortar knife, it indicates that the putty has poor adhesion and should not be selected. Otherwise, the wall will crack, fall off, and powder in the later stage, causing constant troubles!

3.一般的拥有自己独立品牌的腻子粉都是非常的注重自家的品牌的，基本上都会用防伪标识，刮开涂层联系即可分辨真假。

3. Generally, putty powders with their own independent brands pay great attention to their own brand, and usually use anti-counterfeiting labels to distinguish between genuine and fake by scraping off the coating.

用腻子的注意事项

Precautions for using putty

1.水和腻子粉的配比，加水量在40%-50%左右。

The ratio of water to putty powder should be around 40% -50%.

2.我们刮的腻子，不是要求光而是在进行找平

2. The putty we apply is not for light, but for leveling

3.涂刷墙面的腻子，一般是要求刮三遍的，但是每一遍的刮腻子都是要求其干了之后再进行下一遍的涂刷。

3. When applying putty to the wall, it is generally required to scrape it three times, but each time the putty is scraped, it is required to dry before applying the next coat.

4.在刮腻子的时候，一定要避免冷风直吹，这样虽然看似可以把墙面给吹干了，但其实它却是把墙面的水分给锁在墙里面了，如果此时进行下一步的操作，等到冬天供暖的时候，原来没有干的墙面材料就会开始蒸发，出现“干裂”的情况。

4. When scraping putty, it is important to avoid direct cold air blowing. Although this may seem like it can dry the wall, it actually locks the water in the wall. If you proceed to the next step at this time, when winter heating comes, the previously dry wall material will begin to evaporate, resulting in "dry cracking".

5.基层吸收性强时，应在刮涂腻子前用底涂进行封闭，以免腻子中的胶料被基层过多的吸收，影响腻子的附着力。

When the base layer has strong absorption, it should be sealed with a primer before applying putty to prevent the adhesive material in the putty from being absorbed too much by the base layer, which may affect the adhesion of the putty.

6.掌握好刮涂时工具的倾斜度，用力均匀，以保证腻子饱满。

6. Master the inclination of the tool during scraping and apply even force to ensure that the putty is full.

7.为避免腻子收缩过大，出现开裂和脱落，一次刮涂不要过厚，根据不同腻子的特点，厚度以0.5~1mm为宜

7. To avoid excessive shrinkage, cracking, and detachment of putty, do not apply too thick at once. Depending on the characteristics of different putty, a thickness of 0.5-1mm is recommended

8.不要过多地往返刮涂，以免出现卷皮、脱落或将腻子中的胶料挤出，封住表面不易干燥。

8. Do not apply too much back and forth to avoid rolling, peeling, or squeezing out the adhesive in the putty, which will seal the surface and prevent it from drying out easily.

9.选择适当的腻子和刮涂工具，用油灰刀填补基层孔洞和裂缝时，食指压紧刀片，用力将腻子压进缺陷内，要填满、填实，将四周的腻子收利刮干净，使腻子痕迹尽量减少。

9. Choose appropriate putty and scraping tools. When filling the holes and cracks in the base layer with a putty knife, press the blade tightly with your index finger and apply force to press the putty into the defect. Fill and compact the putty, and scrape off the surrounding putty to minimize the putty marks.

选择质量高的腻子粉，拒绝返工修修补补。

Choose high-quality putty powder and refuse rework and repair.

本文由济南腻子粉友情奉献.更多有关的知识请点击:http://www.jnfhjc.com我们将会对您提出的疑问进行详细的解答，欢迎您登录网站留言.

This article is a friendly contribution from Jinan Putty Powder For more information, please click: http://www.jnfhjc.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message