欢迎您浏览济南巨野河福华建材厂,主营:济南腻子粉,济南石膏粉,济南抹面砂浆等建筑装饰材料,大量批发,欢迎咨询。

专注绿色建筑装饰材料

经营管理理念:让客户用的放心!

24小时服务热线:

13864111871

当前位置: 首页 - 新闻动态 > 行业资讯
行业资讯
联系我们

济南福华建材厂

联系人:吴老师 

电话: 

手机:13864111871
          0531-81901300
地址:山东省济南市高新开发区巨野河办事处山圈村西


济南腻子粉施工技巧:冬季腻子不卡手,先粉入水分散助剂再调稀

来源:https://www.jnfhjc.com 日期:2026-03-13 发布人:

  老司机考不过科目二,那么这脚力是一项非常重要的基本功,近期的话有一些师傅讲啊,怎么解决冬季啊,这个腻子里面有一些小团啊,批刮手感不顺滑这样一个问题,今天我们来给大家分享一个正确的一个搅拌方法,我准备了我们的腻子粉,我们的清水和我们的电动搅拌器,好,接下来给大家演示一下;

  As an experienced driver who cannot pass subject two, foot strength is a very important basic skill. Recently, some masters have talked about how to solve the problem of small lumps in the putty during winter, which makes the scraping feel not smooth. Today, we will share with you a correct mixing method. I have prepared our putty powder, our water, and our electric mixer. Alright, let me demonstrate it to you;

  拧的是师傅在工地上的一个搅拌方法啊,首先我们来看一下水,那么我们加水的话是一次一次加够啊,一次加够水,然后来加粉,我们搅拌完以后呢,可以看到我们的粘稠度呢,也基本上达到了我们的一个要求,但是的话呢,我们的分散功率、搅拌机功率也是够的哈,搅拌机功率够,搅拌时长足够啊,加水量也足够,但是我们看一下会出现什么问题,可以看到,可以明显的看到啊,这就是我们师傅反映的小胶团,没有溶解的小胶团在里面,那么这上墙以后会发生什么情况,我们得给大家看一下,来,拍一下,那么我们可以明显的看到啊,这个就是在工地现场支付反馈比较多的,没有溶解的小焦团,并且由于里面的助剂没有完全溶解,所以说导致我们的批刮手感是不太好刮的,来,我们再收一下,看看还是不是会有啊,刮起来是非常难刮的啊,去看一下这里,这里这里,你看里面还有未溶解的小胶团啊,再收一下,好,那么这种粒子挖出来,给我们后续的施工会造成多不方便。

  This is a mixing method used by the master on the construction site. First, let's take a look at the water. If we add enough water at once, then we add the powder. After mixing, we can see our viscosity, which basically meets our requirements. However, our dispersing power and mixer power are also sufficient. The mixer power is sufficient, the mixing time is sufficient, and the amount of water added is also sufficient. But if we look at what problems will occur, we can clearly see that this is the small gum clusters reflected by our master. There are undissolved small gum clusters inside. So what will happen after we put it on the wall? We need to show everyone, come on, take a picture, so we can clearly see that there are many payment feedbacks on the construction site, and there are no dissolved small coke clusters, And due to the incomplete dissolution of the additives inside, our scraping feel is not very good. Let's take another look and see if there are still any issues. Scratching is very difficult. Take a look here, here, and here, you can see that there are still undissolved small clumps inside. Take another look, then digging out these particles will cause inconvenience for our subsequent construction.

  那么怎么样来避免这个问题呢,我们接下来展示一下如何正确的搅拌,统一包灰啊,换个搅拌方法,那么这种情况就可以避免,那么我们现在给大家展示一个啊,比较好的一个搅拌方法,粉还是一样的粉哈,那我们现在开,那么我们看一下我们的水灰比,是一个什么样的一个比例,啊,还要再加,粉一定是没过水的哈,粉一定是没过水的,我们来搅出来看一下状态,那么这是我们现在一个状态啊,我们的是比较稠的,这种状态的话呢,不要着急哈,我们是这一步的主要目的,是为了让我们里面的助剂完全分散。

  So how can we avoid this problem? Next, let's show you how to mix correctly, uniformly package the ash, and change the mixing method. This situation can be avoided. Now, let's show you a better mixing method. The powder is still the same. Let's turn it on now. Let's take a look at our water cement ratio, what kind of ratio is it, and we need to add more. The powder must not have gone through water, and the powder must not have gone through water. Let's mix it out and see the state. This is our current state, which is relatively thick. Don't worry, we are the main focus of this step. The purpose is to completely disperse the additives inside us.
胶水(1)

  那么在这种状态下呢,我们的师傅可以接下来做什么呢,接下来继续加调到你比较喜欢的一个状态,来,我们继续加水,那么继续加水以后呢,就调到了我们师傅个人喜欢的一个这样的一个浓稠度,那么接下来我们上墙去看一下效果,那么现在的话呢,就是按第二种搅拌方法搅拌出来,来我们再来看一下,来我们拉近了看一下哈,那么通过这种先比较加水量比较少,把小料分散,助剂分散,然后再加水搅拌到我们喜欢的浓稠度,这样一个搅拌方法的话,可以看到啊,我们的腻子刮起来的手感,还有我们的一个表现效果都是非常 OK 的,那么如果你遇到了腻子施工手感不顺滑,有可能这样的一个问题,可以采用我们这种搅拌方法试一下。

  So, in this state, what can our master do next? Next, we will continue to add water to a state that you prefer. Then, we will continue to add water. After adding water, we will adjust it to a viscosity that our master personally likes. Next, we will go up to the wall to see the effect. Now, we will follow the second mixing method to stir it out. Let's take a closer look. With this mixing method, we can mix the small materials and additives with less water first, disperse them, and then add water to stir them to a viscosity that we like. You can see the texture and texture of our putty when scraped. Our performance results are all very good Well, if you encounter a problem with the smoothness of putty construction, it's possible that you can try using our mixing method.