欢迎您浏览巨野河福华建材厂,主营:济南腻子粉,济南石膏粉,济南抹面砂浆等建筑装饰材料,大量批发,欢迎咨询。

专注绿色建筑装饰材料

经营管理理念:“优质产品,优质服务”

24小时服务热线:

13864111871

当前位置: 首页 - 新闻动态 > 行业资讯 >
行业资讯
联系我们

高新开发区巨野河福华建材厂

联系人:吴老师 

电话:13864111871 

手机:13864111871
          0531-81901300
地址:山东省济南市高新开发区巨野河办事处山圈村西


夏天的时候刮腻子都会出现哪些问题

来源:https://www.jnfhjc.com 日期:2021-03-11 发布人:juyehe

夏天的时候天气总体来说比较的炎热,温度相对来说也比较高。但是有些人也会选择在夏天的时候进行房屋的装修。在夏天的时候进行房屋装修,不但对装修工人的体力来说是一个巨大的挑战,甚至对装修材料来说,能不能良好的进行使用,也是一个很大的问题,尤其是刮腻子。那么夏天进行装修,腻子粉容易出现哪些问题呢?腻子粉厂家的小编汇总了三个主要的问题。

In summer, the weather is generally hot and the temperature is relatively high. But some people also choose to decorate their houses in the summer. House decoration in summer is not only a great challenge to the physical strength of decoration workers, but also a big problem to the decoration materials, especially putty. So summer decoration, putty powder prone to what problems? Three main problems are summarized in the compilation of putty powder manufacturers.
济南腻子粉
Jinan putty powder
问题一:干得快
Problem 1: fast work
腻子粉料在桶里调配时干的很快,难施工,批刮后失水快,不能正常收压或施工后干燥过快。
The putty powder dries very fast when it is mixed in the bucket, so it is difficult to construct. It loses water quickly after scraping. It can't be compressed normally or dried too fast after construction.
原因:施工环境气温太高,湿度太低、通风太强及阳光直晒,腻子中的复合材料反应加速。
Reasons: the temperature of construction environment is too high, the humidity is too low, the ventilation is too strong and the sunlight is direct, and the reaction of composite materials in putty is accelerated.
解决方案:预防为主,注意施工环境,避免在高温时段、阳光直晒时段施工,控制施工场地通风强度。当基面出现太过干燥、 吸水快的情况时建议刷涂界面剂或者预先湿润基面(但不能有明水)再施工。
Solution: prevention first, pay attention to the construction environment, avoid construction in high temperature period and direct sunlight period, and control the ventilation intensity of the construction site. When the base surface is too dry and absorbs water quickly, it is recommended to brush the interface agent or wet the base surface in advance (but there is no open water) before construction.
问题二:掉粉、 脱层
Problem 2: powder falling and delamination
施工完成及干透后,用手触摸有掉粉现象,严重的甚至出现前后两道腻子之间或腻子与基底之间相互剥离。
After the construction is completed and dried thoroughly, there is powder dropping phenomenon when touching with hands. In serious cases, there is even peeling between the front and back putty or between the putty and the base.
原因:腻子在高温干燥时施工,水分挥发快,没有足够水分进行固化,因而容易脱粉。而底层腻子疏松粉化严重,面层腻子太硬,干燥太快会造成脱层。另外,外墙腻子被雨水冲刷后,粘结剂流失,重批后也容易脱层。
Reason: Putty in high temperature dry construction, moisture volatilization fast, not enough moisture for curing, so easy to powder. The bottom layer putty is loose and powdered seriously, the surface layer putty is too hard, drying too fast will cause delamination. In addition, after the external wall putty is washed by rain, the binder is lost, and it is easy to peel off after re approval.
解决方案:高温、干燥强风天气施工,更好将基面润湿无明水后再进行腻子施工。施工时要收压密实,适度掌握干燥时间。
Solution: high temperature, dry and windy weather construction, it is best to wet the base surface without water before putty construction. During the construction, the pressure should be collected and compacted, and the drying time should be controlled appropriately.