外墙腻子粉的有点有很多，在很多行业都是有应用的，那么外墙腻子粉在行业中有什么应用？

There are many applications of exterior wall putty powder in many industries, so what are the applications of exterior wall putty powder in the industry?

腻子是外墙涂料涂饰时常用于基面处理的涂装配套产品，主要作用是填补基层墙体的缺陷，对基面进行微找平，增加基面的平整度。腻子在外墙涂饰工程中的应用越来越受到重视。主要原因是许多外墙涂料涂饰工程中即使使用了优质涂料，仍会出现质量问题，特别是墙面出现大面积龟裂，剥落等现象。经分析发现，其根源不是涂料自身的质量和基础墙体的问题，而是因为基层处理的腻子质量和涂料或基础墙体不配套。因此腻子在建筑涂料涂饰工程中的地位越来越重要。

Putty is a coating matching product commonly used for base treatment in exterior wall coating. Its main function is to fill the defects of the base wall, perform micro leveling on the base surface, and increase the flatness of the base surface. The application of putty in exterior wall coating engineering is receiving increasing attention. The main reason is that even if high-quality coatings are used in many exterior wall coating projects, quality problems still occur, especially large-scale cracks and peeling on the walls. After analysis, it was found that the root cause is not the quality of the coating itself and the problem with the basic wall, but rather the quality of the putty treated at the grassroots level and the mismatch between the coating or the basic wall. Therefore, putty plays an increasingly important role in architectural coating and finishing engineering.

1：选择合适的刮刀要真确的掌握刮刀的握持方法，在施工过程中要以刮涂有力、操作者省力、刮平、填实为原则。

1: Choosing a suitable scraper requires mastering the gripping method of the scraper accurately. During the construction process, the principles of strong scraping, labor-saving operation, leveling, and filling should be followed.

2：把腻子粉涂在底漆上，因为腻子粉的主要作用是填平，而且腻子粉没有防锈功能，在涂刮腻子粉时应该以高点基层进行刮平。刮平的腻子粉不能太厚。争取用较少的腻子粉达到做好的效果，节省原料费用。

2: Apply putty powder to the primer, as the main function of putty powder is to fill and level, and putty powder does not have anti rust function. When applying putty powder, it should be leveled with a high base layer. The putty powder scraped flat should not be too thick. Strive to achieve good results with less putty powder and save on raw material costs.

3：腻子粉的反复涂刮，一般腻子粉的涂刮需要三遍才能成活，因此在下一遍的涂刮中，需要等到腻子粉彻底干燥后才可以进行，否则会出现龟裂和气泡。

3: The repeated application and scraping of putty powder usually requires three times to survive. Therefore, in the next application, it is necessary to wait until the putty powder is completely dry before proceeding, otherwise cracking and bubbles may occur.

4：辅助材料的添加  刮涂腻子粉完成后，可将涂料加入腻子粉中调配专用腻子粉，其他的填料有细木悄、石膏粉等。

4: After adding auxiliary materials and scraping putty powder, paint can be added into putty powder to prepare special putty powder. Other fillers include fine wood, gypsum powder, etc.

本文来自：济南腻子粉更多的内容请点击：https://www.jnfhjc.com我们将会为您提问的问题提供一个满意的服务，欢迎您的来电！

This article is from Jinan Putty Powder. For more information, please click: https://www.jnfhjc.com We will provide satisfactory service for the questions you ask. Welcome to call us!