1、混合搅拌(水的加入量以施工稠度为准，按腻子粉：水=1：0.5的比例搅拌均匀)，静置10～20分钟，再进行搅拌即可使用。

1. Mix and stir (the amount of water added should be based on the consistency of the construction, and stir evenly according to the ratio of putty powder: water=1:0.5), let it stand for 10-20 minutes, and then stir again before use.

2、吸水性强的基层应先用清水润湿或喷刷胶水进行封底处理后再刮腻子(稠度以适合施工为宜)。

2. The base layer with strong water absorption should be moistened with clean water or sprayed with glue for bottom sealing treatment before applying putty (with a thickness suitable for construction).

3、新抹灰的水泥墙应在养护期后再刮腻子。

3. Newly plastered cement walls should be coated with putty after the curing period.

4、表面处理，墙体表面平滑或为新型建筑材料(如石膏隔墙板，聚苯板，纸面石膏板等需用界面剂处理)

4. Surface treatment, smooth wall surface or new building materials (such as gypsum partition board, polystyrene board, paper faced gypsum board, etc. that require interface agent treatment)

5、用钢刮板或抹刀按常规批刮，刮涂次数不可过多，通常批刮两次，第二次涂层在前涂层干透情况下方可施工。

5. Use a steel scraper or spatula to scrape as usual, and do not scrape too many times. Usually, scrape twice, and the second coating can only be applied after the previous coating has dried completely.

6、批刮厚度及用量根据你购买的产品的包装说明。

6. The thickness and amount of scraping should be based on the packaging instructions of the product you purchased.

7、腻子干后，用320#或240#砂纸进行打磨，尽快涂刷涂料或粘贴墙纸。

7. After the putty dries, use 320 # or 240 # sandpaper to polish it and apply paint or wallpaper as soon as possible.